Food Grade Frozen Yogurt Salad Kraft Paper Bowl Forming Making Machine

• Warranty: 12 Month
• Application: Food
• Production Speed: ＞45pcs/min
• Voltage: 380V 50Hz
• Computer Control Panel: Computer Control Panel
• After-sales Service: 12 Month
• Model NO.: LBWJ-IV
• Transport Package: Export Wooden Case Packing
• Specification: L3800*W 1958*H1800mm
• Trademark: Labo
• Origin: China
• Production Capacity: 300PCS/Year

Product Description

Introduction:
 

1. Component electric appliances adopt ABB, Omron and other branded brands.
2. Japan Mitsubishi PLC
3. Omron 10 inch touch screen
4. Mitsubishi servo motor (0.75KW)
5. The side wind (up and down) adopts ultrasonic sealing, and adopts Leister 3.3 KW auxiliary electric heating.
6. Bottom Heated adopts switzerland LEISTER 6.6KW with overheating protection device.  
7. LEISTER electric heater adopts air inlet RB type 1.1KW high pressure ring blower.
8. Equipment with emergency stop button
9. The jog adopts the boot-start safety button.
10. Electrical control cabinet.
11. The machine its driven by german sew 3kw geared motor.
12. The paper feeding adopts suzhou shenbang 0.1KW
13. Dry vacuum pump is used for vacuuming of twelve-hole mold and eight-hole mold.
14. Autonics temperature control instrument, with PID proportiaonal adjustment, over-limit alarm shutdown, fault diagnosis.
15. The air outlet cup is equipped with a 2.2kw high-pressure hair dryer.
16. Out of paper reminder alarm system.
17. Paper jam alarm shutdown system.
18. Flying cup jammed cup stop system.
19. Automatically check the shut-down waste cup rejection system.
20. The main pneumatic components adopt the the japanese SMC brand, the cup collecting device adopts the airtac brand, and the air inlet is equipped with an oil-water separator and a stainless steel gas stabilization tank to ensure uniform and dry air supply clean.
21. The transmission of the whole machine adopts gear transmission, and the heat treatment is integrally quenched.
22. In the paper feeding stage, the paper is fed three times, preheated by hot air, and the vertical sealing of the cup body adopts a four-column diameter 25mm lifting cam mechanism.
23. The paper coveying adopts the roller type anti-jam mechanism.
24. The height of the paper holder link can be adjusted.
25. Pneumatic ejection and pipeline conveying device are adopt for the cup out.
26. The cup mold is hardened with high-quality aluminum alloy material.
27. The roll mouth is made of japanese SKD11 heat treatment, high surface finish and not easy to wear.
28. The bottom roller adopts a double bottom pressing structure, which is simple in structure, extremely low in failure rate and uniform indentation.
29. It adopts double cylindrical cam indexing mechanism, and the diameter of the twelve-hole plate indexing plate is 580mm
30. The diameter of the twelve-hole disc cylindrical cam imported from korea is 245mm.
31. The diameter of the eight-hole disc indexing disc is 370mm.
32. The diameter of the eight-hole disc cylindrical cam imported from south korea is 230mm.
33. The cam follower adopts 20 japanese IKO products.
34. Twleve equal aluminum alloy cup mold plate diameter 850mm.
35. The bottom paper of the cup adopts a pneumatic lifting device, the maximum outer diameter of the bottom paper of the cup is 1200mm, and the inner diameter of the paper tube is 3 inches or 6 inches.
36. The cup bottom paper is conveyed by servo motor, the width of the cup bottom paper is the diameter of the punching hole at the bottom of the cup+5mm, and the length is the cup hole+2mm, the edge material is cut off the output.
37. The main drive shaft adopts diameter 80 chrome-plated heat-treated precision spindle.
38. Machine lubrication adopts spray type automatic oiling system.
39. The frame is made of 120*50mm square steel and 20mm steel plate (bottom plate) full arc welding, aging treatment, and the insllation part is made of metal cutting cut to ensure equipment manufacturing accuracy.
40. The main parts and wearing parts are pressed by CNC machine tools, and the main platform of the equipment adopts a 30mm steel plate double-sided flat grinding machining center bed processing, electroplating treatment.
41. The color of the machine is off-white, with metal frame and PC board safety cover.
42. The middle of the machine is isolated by the panel, and the bottom of the panel is fully enclosed for spraying oil. The oil pump system imported from Taiwan.   Introduction:  
43. Component electric appliances adopt ABB, Omron and other branded brands.
44. Japan Mitsubishi PLC
45. Omron 10 inch touch screen
46. Mitsubishi servo motor (0.75KW)
47. The side wind (up and down) adopts ultrasonic sealing, and adopts Leister 3.3 KW auxiliary electric heating.
48. Bottom Heated adopts switzerland LEISTER 6.6KW with overheating protection device.  
49. LEISTER electric heater adopts air inlet RB type 1.1KW high pressure ring blower.
50. Equipment with emergency stop button
51. The jog adopts the boot-start safety button.
52. Electrical control cabinet.
53. The machine its driven by german sew 3kw geared motor.
54. The paper feeding adopts suzhou shenbang 0.1KW
55. Dry vacuum pump is used for vacuuming of twelve-hole mold and eight-hole mold.
56. Autonics temperature control instrument, with PID proportiaonal adjustment, over-limit alarm shutdown, fault diagnosis.
57. The air outlet cup is equipped with a 2.2kw high-pressure hair dryer.
58. Out of paper reminder alarm system.
59. Paper jam alarm shutdown system.
60. Flying cup jammed cup stop system.
61. Automatically check the shut-down waste cup rejection system.
62. The main pneumatic components adopt the the japanese SMC brand, the cup collecting device adopts the airtac brand, and the air inlet is equipped with an oil-water separator and a stainless steel gas stabilization tank to ensure uniform and dry air supply clean.
63. The transmission of the whole machine adopts gear transmission, and the heat treatment is integrally quenched.
64. In the paper feeding stage, the paper is fed three times, preheated by hot air, and the vertical sealing of the cup body adopts a four-column diameter 25mm lifting cam mechanism.
65. The paper coveying adopts the roller type anti-jam mechanism.
66. The height of the paper holder link can be adjusted.
67. Pneumatic ejection and pipeline conveying device are adopt for the cup out.
68. The cup mold is hardened with high-quality aluminum alloy material.
69. The roll mouth is made of japanese SKD11 heat treatment, high surface finish and not easy to wear.
70. The bottom roller adopts a double bottom pressing structure, which is simple in structure, extremely low in failure rate and uniform indentation.
71. It adopts double cylindrical cam indexing mechanism, and the diameter of the twelve-hole plate indexing plate is 580mm
72. The diameter of the twelve-hole disc cylindrical cam imported from korea is 245mm.
73. The diameter of the eight-hole disc indexing disc is 370mm.
74. The diameter of the eight-hole disc cylindrical cam imported from south korea is 230mm.
75. The cam follower adopts 20 japanese IKO products.
76. Twleve equal aluminum alloy cup mold plate diameter 850mm.
77. The bottom paper of the cup adopts a pneumatic lifting device, the maximum outer diameter of the bottom paper of the cup is 1200mm, and the inner diameter of the paper tube is 3 inches or 6 inches.
78. The cup bottom paper is conveyed by servo motor, the width of the cup bottom paper is the diameter of the punching hole at the bottom of the cup+5mm, and the length is the cup hole+2mm, the edge material is cut off the output.
79. The main drive shaft adopts diameter 80 chrome-plated heat-treated precision spindle.
80. Machine lubrication adopts spray type automatic oiling system.
81. The frame is made of 120*50mm square steel and 20mm steel plate (bottom plate) full arc welding, aging treatment, and the insllation part is made of metal cutting cut to ensure equipment manufacturing accuracy.
82. The main parts and wearing parts are pressed by CNC machine tools, and the main platform of the equipment adopts a 30mm steel plate double-sided flat grinding machining center bed processing, electroplating treatment.
83. The color of the machine is off-white, with metal frame and PC board safety cover.
84. The middle of the machine is isolated by the panel, and the bottom of the panel is fully enclosed for spraying oil. The oil pump system imported from Taiwan.   

Main Technical Parameters:

Model	LBWJ-IV
Cup Sizes	Max 170*120mm or 140*140mm
Machine Speed	50-70pieces/min
Machine Net Weight	8800KGS
Power Supply	Three-phase 380V/50HZ
Related Power	30KW
Air Consumption	0.6m3/min
Machine Dimension	L3800*W 1958*H1800mm
Paper Specification	210-350gsm

Packing and Loading of Container: